What Is a Tile Leveling System?
A tile leveling system is a set of tools — clips, wedges, and pliers — designed to eliminate lippage (uneven edges) between adjacent tiles during installation. Whether you are laying large-format floor tiles or wall tiles, these systems ensure a perfectly flat, professional finish every time.
At Yueqing Zebra Tools Co., Ltd., we manufacture high-quality plastic tile leveling systems used by professional contractors in over 20 countries.
Why Use a Tile Leveling System?
- Eliminates Lippage — Prevents one tile edge from sitting higher than its neighbor
- Faster Installation — Reduces installation time by up to 30% vs spacer-only methods
- Consistent Results — Professional-grade flatness for all skill levels
- Works with Large Format Tiles — Essential for tiles 60×60 cm and larger
Types of Tile Leveling Systems
1. Wedge-Type (Clip & Wedge) System
The most common and affordable type. A plastic clip sits under the tile edge, and a wedge pulls adjacent tiles flush.
2. T-Type (Screw Cap) System
Uses threaded posts and screw-on caps for precise height control. Fully reusable.
3. Horseshoe Shim System
U-shaped shims slide under tiles to adjust height differences. Best for fixing minor unevenness.
Step-by-Step Installation
- Spread adhesive with notched trowel
- Insert clips under tile edges (every 30-40 cm)
- Press adjacent tile firmly into adhesive
- Insert wedges through clips, push until flush
- Use spirit level and Height Locator to verify
- Wait 24 hours for adhesive to cure
- Kick clip tabs sideways to break off
- Grout as normal — broken bases remain hidden
How Many Clips Do You Need?
For 60×60 cm tiles: ~70 clips/10 sqm (floor), ~100 clips/10 sqm (wall), ~120 clips/10 sqm (large format 120×120 cm).
We sell clips in 100 pcs/bag with wholesale pricing.
Pro Tips
- Match clip thickness to joint width (1mm–3mm)
- Use Horseshoe Shims on uneven substrates before clips
- Keep spare wedges — they are reusable
- Invest in a Complete Starter Kit if new to leveling